Reindeer SVG With Antlers (Head and Full Body)

Reindeer SVG With Antlers design on a white mug

A front-facing reindeer head with branching antlers, and a leaping reindeer in side view with its back legs stretched out behind it. Between them they cover most of what people cut a reindeer for in December: window decals, glass blocks, mugs, gift bags and wood signs.

Everything in this set is built for adhesive vinyl. The head comes three ways: a 6 in tall single-color version, the same head split into two colors so the nose can be red, and a 3.5 in version redrawn with heavier antlers for mugs and ornaments. The leaping reindeer is 8 in wide.

4 cut files in this downloadFree
Preview of the 4 cut files in this download
FileSizeMaterialLayersCheck
Reindeer head with antlers, single color (6 in tall)4.25 × 6.12 inVinyl1 layer✓ Cut-checked
Reindeer head with red nose, 2 color (6 in tall)4.25 × 6.12 inVinyl2 layers✓ Cut-checked
Reindeer head, mug or ornament (3.5 in tall)2.5 × 3.62 inVinyl1 layer✓ Cut-checked
Leaping reindeer silhouette (8 in wide)8.12 × 7.25 inVinyl1 layer✓ Cut-checked
⬇ Download ZIP (259 KB)
SVGDXFPNG
Free for personal use and for up to 500 handmade items you sell. Please link to this page instead of sharing the file. License

What’s in the ZIP

File Size Pieces Best for
Head, single color 4.25 x 6.12 in 2 (head and nose) Glass blocks, windows, gift bags
Head, two color 4.25 x 6.12 in 1 brown, 1 red A red nose on a brown head
Head, mug 2.5 x 3.62 in 2 (head and nose) Mugs, tumblers, flat ornaments
Leaping reindeer 8.12 x 7.25 in 1 Windows, signs, a line of reindeer along a wall

How the head is built

The antlers are the part that usually ruins a reindeer cut file. Thin, spiky tines look great on screen and then tear when you pull the backing away. Here each antler is one curved beam with four tines, drawn as tapered strokes with round ends, so there are no needle points for the blade to drag through. The antlers, ears and face are welded into a single piece.

The eyes are two oval knockouts, so whatever surface you stick the head to shows through as the eyes. The nose is its own oval, sitting just below the muzzle with a narrow curved gap between them. That gap is what makes the two-color version work: in that file the brown layer and the red nose don’t overlap at all, they sit side by side, so there’s no stacking and no ridge.

The 3.5 in mug head was redrawn for its size. Its antler strokes are drawn heavier and the gap above the nose is wider, because at mug size the 6 in head’s antlers would get too thin to weed. Every file passed our adhesive vinyl cut check at the size listed above.

The leaping reindeer

This one is a single solid silhouette: deep chest, round haunch, front legs tucked up, back legs stretched long, a small tail and ear, and one antler swept back over the head. It comes off the mat in one piece with just one small enclosed gap to pick out, which makes it the easiest file in the set to weed and the easiest to line up on a window.

What you need

  • Cutting machine and a standard grip mat
  • Adhesive vinyl in brown (and red for the nose), removable for windows, permanent for mugs
  • Transfer tape
  • Weeding hook and a scraper
  • Rubbing alcohol and a lint-free cloth to clean glass or ceramic

Not sure which vinyl to buy? Our permanent vs removable vinyl guide sorts it out by surface.

Cutting the two-color head

  1. Upload the SVG. In Design Space, click Upload, then Upload Image and Browse to the file. SVGs with layers are separated into layers after you upload and save. Our upload guide walks through it on desktop and in the app.
  2. Check the size. The head should read 6.12 in tall. If you resize, select both layers together so the nose stays in place.
  3. Click Make It. Design Space puts the brown and red layers on separate mats. Leave Mirror off, since adhesive vinyl is cut face up, and pick your vinyl from the material list.
  4. Weed. On the brown mat, peel the background and pick out the two eyes. Work slowly around the antler tips, lifting toward the tine rather than away from it. The red nose is a plain oval with nothing to weed inside it.
  5. Apply the brown layer first. Lift it with transfer tape, burnish it down on a clean surface and peel the tape back at a sharp angle.
  6. Add the nose. Pick up the red oval with a small piece of tape and set it into the curved space below the muzzle. The gap in the brown layer shows you exactly where it goes.

For the single-color head you skip steps 5 and 6: tape over the whole thing, nose included, and it goes down in one move. Our transfer tape guide covers the hinge method if you want the head dead straight on a sign.

On a mug, center the 3.5 in head opposite the handle, or cut two and put one on each side. Curved surfaces make vinyl pucker, so burnish from the center out; our vinyl on a mug guide has more on that.

Sizes that work

Project File Size
Mug, tumbler or flat ornament Mug head 3.5 in tall
Glass block, gift bag, 8 x 10 frame Head (either version) 6 to 7 in tall
Window pane or 12 x 12 sign Head or leaping reindeer 8 to 10 in
Front door glass or long porch board Leaping reindeer 10 to 16 in wide

Don’t take the 6 in head below 6 in, and don’t take the mug head below 3.5 in. The antler tines are the first thing to get too fine when you shrink either one. Going bigger is fine for every file.

Ideas and a fix

Cut three leaping reindeer, flip one with Flip Horizontal in Design Space, and run them across a mantel mirror or a long window so they leap in both directions. On a dark front door, try the head in gold or white vinyl instead of brown. For a kid’s gift bag, pair the head with a Santa hat or put it on a Santa sack.

If an antler tip lifts with the backing while you weed, lay it back down, press it with a fingertip and pull the backing from the other direction. Tines tear when you peel against their curve. If the tips keep lifting on every cut, check that your blade is clean and that you picked the right vinyl setting. Our weeding guide has more tricks for small parts.

Questions

Can I cut the reindeer head in iron-on?

We checked these files for adhesive vinyl, which allows finer detail than iron-on. For a shirt, enlarge the 6 in head to 8 in or more so the antlers get thicker, mirror it, and press with your material maker’s settings or Cricut’s Heat Guide.

How do I make the reindeer nose red?

Use the two-color head file. The nose is its own red layer that sits beside the brown head without overlapping, so you apply the head first and drop the nose into the gap below the muzzle.

What size reindeer fits a mug?

Use the mug file at 3.5 in tall. It has heavier antlers than the 6 in head so it stays easy to weed at that size.

author avatar
Clean Cut SVG Studio Design and editorial team
The Clean Cut SVG studio designs free cut files in code and checks every one at its listed size so it cuts and weeds clean. We write plain-English guides for Cricut, Silhouette and other cutting machines.