Christmas Lights SVG (String of Bulbs)

Christmas Lights SVG design cut out and laid on a cutting mat

A string of old-fashioned C9 bulbs hanging from a scalloped wire. Put it along the top of a wood sign, across a mirror, over a kitchen window or on the lid of a gift box, and it frames whatever sits underneath.

The download has the strand two ways: one color at 10 in wide, and five colors at 11 in wide with red, green, gold and blue bulbs on a dark green wire. There’s also a sheet of three single bulbs (3, 2.2 and 1.6 in tall) for tags, cards and filling gaps. Everything is built for adhesive vinyl.

3 cut files in this downloadFree
Preview of the 3 cut files in this download
FileSizeMaterialLayersCheck
Christmas light strand border, single color (10 in)10.12 × 2.12 inVinyl1 layer✓ Cut-checked
Christmas light strand, 5 color (11 in)11.12 × 2.25 inVinyl5 layers✓ Cut-checked
Single Christmas bulbs (3, 2.2 and 1.6 in tall)4.38 × 3.12 inVinyl1 layer✓ Cut-checked
⬇ Download ZIP (116 KB)
SVGDXFPNG
Free for personal use and for up to 500 handmade items you sell. Please link to this page instead of sharing the file. License

How the strand is put together

The wire dips in four shallow swags across the width. Seven bulbs hang from it, each tilted a little to follow the slope of the wire where it hangs, the way real bulbs do. Each bulb has a small square socket attached to the wire.

In the one-color strand, the wire and all seven sockets are welded into a single piece, and each bulb is its own piece with a narrow gap between glass and socket. So you weed eight pieces in all, and that gap is what lets you see the bulb shape from across a room even though it’s all one color.

The five-color file is the same strand split by color:

Layer Pieces
Wire and sockets (dark green) 1
Bulbs red 2
Bulbs green 2
Bulbs gold 2
Bulbs blue 1

Reading left to right, the bulbs go red, green, gold, blue, red, green, gold. Before you cut, know that the layers in this file don’t overlap. Each bulb meets the bottom edge of its socket exactly, so the colors sit edge to edge instead of stacking. That keeps the decal flat, but it means placement matters.

The wire is thin but not too thin. All three files passed our adhesive vinyl cut check at their listed sizes, with no piece too small to weed and no stroke under our vinyl minimum.

What you need

  • Cutting machine and a standard grip mat
  • Adhesive vinyl: dark green plus red, light green, gold and blue for the five-color strand
  • Standard grip transfer tape
  • Weeding hook and a scraper
  • Painter’s tape and a ruler for lining up a long strand

Putting the five-color strand together

  1. Upload the SVG. Layers stay separate after upload (see our upload guide). Check that the strand reads 11.12 in wide; it fits across a 12 x 12 mat.
  2. Cut each color. Click Make It. Design Space gives each color its own mat. Leave Mirror off for adhesive vinyl, pick your vinyl in the material list and cut each mat in turn.
  3. Weed. The wire mat is the only one with any real weeding: peel slowly along the wire so it doesn’t stretch. The bulb mats are just teardrops.
  4. Stick down the wire first. Use the ruler and painter’s tape to mark a straight line, lift the wire with transfer tape and burnish it down. Peel the tape away.
  5. Add the bulbs. Lift each bulb color with a strip of transfer tape and set every bulb so its flat top touches the bottom of its socket. Start with the blue one in the middle and work out.

You can build the whole strand on one sheet of transfer tape before it touches your project. Lift the wire with tape, then lay that same tape over the weeded red bulbs, lined up under the sockets, and press. Repeat for each color, then apply the finished strand in one go. It works best while the tape is still sticky, so use a fresh piece. Our multi-color vinyl decal guide has more on building decals from several colors.

The one-color strand is simpler: one sheet of tape over all eight pieces and it goes down in one move. Our transfer tape guide explains the hinge method, which keeps a long, narrow design from going crooked.

Sizes

Where it’s going File Width
Top of a 12 x 12 sign or across a gift box lid Either strand 10 to 11 in
Top of a long porch board or a mirror Either strand, repeated 10 to 11 in per strand
Window valance area Either strand, enlarged up to about 20 in (12 x 24 mat)
Gift tags, card fronts, jar lids Single bulbs as cut, 1.6 to 3 in tall

To go longer than one strand, cut two or three and butt the wire ends together. The wire ends at the same height at each side, so the swags carry on. Going smaller than 10 in is where it gets risky: the wire is the thinnest part of the design, and shrinking the strand shrinks the wire with it. If you need small lights, use the single bulbs instead.

Other ways to use it

The single bulbs sheet gives you three sizes, each with its socket as a separate piece. Stick one on a gift tag, or line up a row of the smallest ones across a card front. Mixing bulb colors from vinyl scraps is a good way to use up the odd bits of red and green from other projects.

On a dark chalkboard-style sign, try the one-color strand in white or silver, then add a Merry and Bright saying under it. For signs in general, our guide to choosing vinyl colors helps you pick shades that read from a distance.

If the wire stretches or kinks while you weed, you’re pulling too fast or at too shallow an angle. Fold the waste vinyl back over itself and peel slowly, and hold the wire down with the tip of your hook as the waste passes it.

Questions

How many colors is the Christmas lights SVG?

The layered strand has five: a dark green wire with sockets, then red, light green, gold and blue bulbs. There’s also a one-color strand and a one-color sheet of single bulbs.

Do the Christmas light layers overlap?

No. Each bulb meets its socket edge to edge, so the decal stays flat. Put the wire down first, then set each bulb against its socket, or assemble the whole strand on one sheet of transfer tape.

Can I make the lights strand longer?

Cut two or more strands and line up the wire ends. You can also enlarge one strand to fit a 12 x 24 mat, but don’t shrink it below 10 in, because the wire gets too thin.

author avatar
Clean Cut SVG Studio Design and editorial team
The Clean Cut SVG studio designs free cut files in code and checks every one at its listed size so it cuts and weeds clean. We write plain-English guides for Cricut, Silhouette and other cutting machines.