Cookies for Santa SVG for a Plate or Tray

Cookies for Santa SVG for a Plate or Tray design on a white plate

A plate that only comes out on Christmas Eve is the kind of thing kids remember. This free Cookies for Santa SVG turns a plain dinner plate or charger into one: “COOKIES FOR” arched over “Santa” in a big script, a small star on each side, and a row of two chocolate chip cookies with a glass of milk between them.

The round plate layout is 6.62 x 6 inches, sized for the flat center of a 10 to 11 inch plate or an 8 inch charger. The download also has a straight version for a serving tray (10.12 x 4.5 inches) and a “Milk for Santa” design for the glass or mug (3.38 x 1.75 inches). All three are made for permanent adhesive vinyl.

3 cut files in this downloadFree
Preview of the 3 cut files in this download
FileSizeMaterialLayersCheck
Cookies for Santa plate (6.5 in round layout)6.62 × 6 inVinyl1 layer✓ Cut-checked
Cookies for Santa tray (10 in)10.12 × 4.5 inVinyl1 layer✓ Cut-checked
Milk for Santa glass/mug (3.25 in)3.38 × 1.75 inVinyl1 layer✓ Cut-checked
⬇ Download ZIP (216 KB)
SVGDXFPNG
Free for personal use and for up to 500 handmade items you sell. Please link to this page instead of sharing the file. License

The three designs

Plate. The arc of block capitals follows the curve of a round plate, so the whole layout reads as a circle even though the bottom is open. Both cookies have a bite taken out of the top corner and six little chips knocked out of them; the right cookie is a mirror image of the left, so both bites face the glass. The milk glass has a clear band near the top, the empty part of the glass above the milk line.

Tray. “Cookies” in the same script on top, with “FOR SANTA” in spaced capitals below, flanked by a small cookie on the left and a glass of milk on the right. This one fits a long rectangular tray or a cutting board.

Glass. “Milk” in script over “FOR SANTA.” At 3.38 inches wide it sits comfortably on a standard mug or a straight-sided glass.

Each design is one color and one welded piece per shape, with no overlapping paths. All three passed our cut check for adhesive vinyl at their listed sizes. The plate is the busiest of the set, with 37 separate cut outlines, and a dozen of those are chocolate chips. Each chip is a small hole you weed out of the cookie.

What you need

  • Permanent adhesive vinyl in red, or any color that shows up on your plate
  • A plate with a flat center at least 7 inches across (a clear glass plate works best; see below), a tray, and a glass or mug
  • Standard grip cutting mat, 12×12
  • Weeding hook
  • Transfer tape and a scraper
  • Rubbing alcohol and a lint-free cloth
  • Parchment, a paper doily or a napkin for the cookies

Keep the vinyl away from the cookies

Adhesive craft vinyl isn’t sold as a food-contact surface, and the usual advice is to keep it off the parts of a dish that food or lips touch. That’s awkward on a plate where the design sits right where the cookies go. There are two good ways around it.

Use a clear glass plate and put the vinyl on the back. Cut the design mirrored, apply it to the underside of the plate, and it reads correctly through the glass from the top. The cookies sit on glass, and the vinyl never touches them.

Or use an opaque plate or charger as a display piece. Apply the design to the top as usual, then set a doily, a square of parchment or a napkin down before the cookies go on. A charger works well here. An 8 inch charger holds the design, and Santa’s cookies can sit on a napkin or a smaller plate on top of it.

The same thinking applies to the milk glass. Put the design low on the side, well below the rim where lips go.

Making the plate

  1. Measure the flat center. Put a ruler across the plate. The design is 6.62 inches wide, so you need a flat area a bit wider than that. Vinyl that runs up onto the curved rim tends to wrinkle.
  2. Upload. In Cricut Design Space, click Upload, then Browse, and choose cookies-for-santa-plate.svg. Our upload guide goes through it.
  3. Set Mirror. Click Make It. For the top of a plate, leave Mirror off. For the underside of a clear glass plate, turn the Mirror toggle on for that mat on the Prepare screen. Then pick your vinyl setting and cut.
  4. Weed the chips last. Remove the background, then the letter counters, then the band in the milk glass. Save the 12 chocolate chips for the end and pick each one out with the tip of the hook. The weeding guide covers small holes like these.
  5. Clean the plate. Wipe the area with rubbing alcohol and let it dry completely. Any film of soap or skin oil will make the edges lift.
  6. Apply from the center. Cover the design with transfer tape and burnish. Find the center of the plate, press the middle of “Santa” down there first, and smooth outward toward the arc and the cookies. Burnish again, then peel the tape back low and slow.

For washing, follow the care instructions from your vinyl’s maker and give the vinyl time to set before the first wash. Cricut, for example, publishes dishwasher care instructions for its own permanent vinyl. Other brands differ. Gentle hand washing, without scrubbing the design, is the safe choice for a plate you want to last.

Which file goes where

Item File Size
10 to 11 in dinner plate, flat center Plate 6.62 x 6 in
8 in charger Plate 6.62 x 6 in
12 in platter or charger Plate, scaled up Up to about 8 in wide, if the flat area allows
Rectangular tray or cutting board Tray 10.12 x 4.5 in
Mug or glass for the milk Glass 3.38 x 1.75 in

Don’t shrink the plate design for a salad plate. At smaller sizes the chips in the cookies close up and the gaps in the arched capitals get too narrow to weed. Pick a bigger plate, or use the tray file on a small board. The plate and tray files both fit a 12×12 mat.

Other ideas

A set in the same red makes a nice Christmas Eve box: the plate, the milk glass and a small tray for the carrot and reindeer treats. White vinyl on a red or green charger also works well, as does gold on a white plate. The tray file also fits the lid of a large cookie tin, if you’d rather deliver the cookies than leave them out.

If the arced capitals peel up with the transfer tape instead of staying on the plate, burnish longer and peel the tape back at a sharper angle, flat against the plate. On glass, the mug guide has more on getting vinyl to lie flat on curves. For the rest of the Christmas Eve table, see the Hot Cocoa Bar SVG.

Questions

What size plate fits the Cookies for Santa design?

The round layout is 6.62 x 6 inches. It fits the flat center of a 10 to 11 inch dinner plate or an 8 inch charger. Measure your plate’s flat area first.

Is vinyl safe for a plate that holds cookies?

Keep vinyl off the surfaces food touches. Put the design on the underside of a clear glass plate, mirrored, or set the cookies on parchment, a doily or a napkin.

Do I need to mirror the design?

Only if you apply it to the back of a clear glass plate so it reads through the glass. On the top of a plate, a tray or a glass, leave Mirror off.

Can I put the plate in the dishwasher?

Follow the care instructions from your vinyl’s maker. Hand washing without scrubbing the design is the gentler option.

author avatar
Clean Cut SVG Studio Design and editorial team
The Clean Cut SVG studio designs free cut files in code and checks every one at its listed size so it cuts and weeds clean. We write plain-English guides for Cricut, Silhouette and other cutting machines.