Ho Ho Ho SVG for Christmas Shirts

Ho Ho Ho SVG for Christmas Shirts design on a white T-shirt

Three HO’s stacked down the front of a shirt, a Santa hat tipped over the first H, and “merry christmas” in script across the bottom. That’s the main file here. It’s a tall, narrow design (6.75 in wide and 11.12 in tall) made for iron-on on an adult tee or sweatshirt.

Two more versions come with it. One is a single line of script “Ho Ho Ho” at 10 in wide with the hat on the first H, for across a chest or a tote bag. The other is a short, heavy HO HO HO at 3.5 in wide, redrawn for permanent vinyl on a mug.

3 cut files in this downloadFree
Preview of the 3 cut files in this download
FileSizeMaterialLayersCheck
Ho Ho Ho stacked with santa hat, shirt (11 in tall)6.75 × 11.12 inHTV (iron-on)1 layer✓ Cut-checked
Ho Ho Ho script with santa hat, shirt (10 in)10.12 × 3.25 inHTV (iron-on)1 layer✓ Cut-checked
HO HO HO with santa hat, mug (3.5 in)3.62 × 1 inVinyl1 layer✓ Cut-checked
⬇ Download ZIP (181 KB)
SVGDXFPNG
Free for personal use and for up to 500 handmade items you sell. Please link to this page instead of sharing the file. License

Three layouts, three fonts

The stacked version uses Alfa Slab One, a very heavy slab serif. At 11 in tall each letter is well over 2 in high, which is why it reads from across a room. The Santa hat sits on the top-left H with a fluffy scalloped fur band and a round pompom, and the fur band is joined to the top of the H, so the hat and that letter cut and lift as one piece. “merry christmas” is Pacifico, a round brush script, tucked up under the last HO with the same kind of gap.

The script line is all Pacifico. The hat leans over the first H at a jaunty angle, and each “Ho” is welded into one piece so the connecting stroke between the H and the o doesn’t get cut twice.

The mug version is Titan One, a rounded heavy sans. A fluffy fur band would turn to crumbs at 3.5 in, so the mug hat gets a smooth band and a plain round pompom instead. The whole mug design is only 1 in tall, which leaves room on the mug for a name or a second line if you want one.

All three are single-color files. Every letter and hat piece is welded, and the stacked and script files passed our iron-on cut check at 11.12 in tall and 10 in wide; the mug file passed our adhesive vinyl check at 3.5 in.

What to expect when you weed

The stacked design comes off the carrier in 11 pieces: six big letters (the fur band is joined to the top of the first H), the hat body and pompom, the two script words and the dot on the i. None of them are fiddly except the i dot. The O’s each have a tall counter to lift out.

The script line has fewer pieces but more curves. Pull the background slowly around the curls of the H’s, and leave the pompom sitting on the carrier.

What you need

  • Cutting machine and a standard grip mat
  • Iron-on (HTV) for shirts and totes, or permanent adhesive vinyl for the mug
  • Weeding hook
  • Heat press or household iron, and a protective sheet
  • Transfer tape (mug only)
  • A shirt, sweatshirt, tote or mug

Making the stacked shirt

  1. Upload and check the size. Upload the SVG in Design Space (our upload guide has the steps) and make sure it reads 11.12 in tall. It fits on a 12 x 12 mat.
  2. Mirror it. Click Make It and toggle Mirror on for the mat. Cricut’s help says Design Space mirrors automatically when you pick an iron-on material setting, but look at the preview anyway: “merry christmas” should read backwards.
  3. Load it shiny side down. Iron-on goes on the mat with the carrier sheet facing down, then choose your iron-on type in the material list and cut.
  4. Weed. Peel the outer background, then the three O counters and the gaps between the H stems. Leave the i dot and the pompom on the carrier.
  5. Place and press. Fold the shirt in half to find the center line, line up the gap between the H’s and O’s with it, and press using the temperature, time and pressure from Cricut’s Heat Guide or your iron-on maker. Peel warm or cool as your material says.

For the mug, cut permanent vinyl with Mirror off, lift the design with transfer tape and burnish it on from the middle out. Our vinyl on a mug guide covers the curve.

First time with iron-on? Our guide to making your first Cricut shirt covers placement and pressing, and pressing HTV with a household iron helps if you don’t have a press.

How big to go

Item File Size
Adult tee or sweatshirt, vertical Stacked 11 to 12 in tall
Adult tee, across the chest Script 10 to 11 in wide
Tote bag Script or stacked 10 in wide, or 11 in tall
Mug Mug 3.5 in wide

We checked the stacked file at 11.12 in tall and the script file at 10 in wide for iron-on. Smaller shirts are the catch. Shrink the stacked design for a youth tee and the joins in the script and the scallops on the fur band are the first parts to drop below our iron-on minimum. Since neither shirt file was checked below its listed size, for kids’ shirts pick a design that comes in youth and toddler sizes, like our Elf Squad set.

Variations

Two colors. The hat is part of the same cut layer, but you can split it out. Duplicate the design, then on one copy use Contour to hide everything except the hat pieces and on the other hide the hat (Cricut’s Contour article shows how). Cut the letters in green or black and the hat in red. Because the hat already has a gap around it, the two colors sit side by side with no overlap.

Glitter. Once the hat is split out, cut it from glitter iron-on and the fur band gets some sparkle. Cricut’s layering instructions say other iron-on won’t stick well on top of glitter, which doesn’t matter here because the two colors never overlap.

Making shirts for everyone? Pair this with the matching family Christmas shirts file.

Questions

What font is the Ho Ho Ho SVG?

Alfa Slab One for the stacked HO’s, Pacifico for “merry christmas” and the script line, and Titan One for the mug version. The files are already converted to cut paths, so you don’t need the fonts installed.

What size should Ho Ho Ho be on a shirt?

The stacked file is 11.12 in tall for an adult shirt front. For a design across the chest, the script file is 10 in wide.

Can I put Ho Ho Ho on a mug?

Use the mug file. It’s a 3.5 in wide HO HO HO in heavier letters with a simpler hat, built for permanent vinyl, because the shirt versions get too fine at mug size.

author avatar
Clean Cut SVG Studio Design and editorial team
The Clean Cut SVG studio designs free cut files in code and checks every one at its listed size so it cuts and weeds clean. We write plain-English guides for Cricut, Silhouette and other cutting machines.