A classic gingerbread man with round hands and feet, three buttons, a smile and zigzag icing at his wrists and ankles. The icing is cut out of the cookie, so in a single color the background shows through as the “frosting.” Stick him on a white sign and the icing reads white; put him on a red door and it reads red.
There are three files. A 5 in knockout version for adhesive vinyl, a 5 in layered version in cardstock with a separate icing layer to glue on top, and a sheet of six 3.5 in gift tags with a 0.2 in ribbon hole, also for cardstock.

| File | Size | Material | Layers | Check |
|---|---|---|---|---|
| Gingerbread man with icing knockouts (5 in) | 4.5 × 5.12 in | Vinyl | 1 layer | ✓ Cut-checked |
| Gingerbread man, cookie + icing layers (5 in) | 4.5 × 5.12 in | Cardstock | 2 layers | ✓ Cut-checked |
| Gingerbread gift tags, 6 on a sheet (3.5 in tall, 0.2 in ribbon hole) | 9.75 × 7.5 in | Cardstock | 1 layer | ✓ Cut-checked |
How the cookie is drawn
He’s built from simple rounded shapes welded together: a round head, an oval body, and arms and legs with rounded ends. No sharp corners on the outline means nothing to snag when you peel vinyl or pop cardstock off the mat.
The icing is ten small pieces of detail: two round eyes, a curved smile, three round buttons and four zigzag lines. In the knockout file they’re all cut away from the cookie. In the layered file they’re a separate white layer.
The zigzags at the wrists and ankles stop just short of the edges of each arm and leg, so the hands and feet stay joined to the body. The knockout man cuts as one solid piece with ten icing windows in it, and each tag is one piece too. Nothing comes loose when you lift it off the mat.
Each file passed our cut check at its listed size: adhesive vinyl for the knockout, cardstock for the layered man and the tags. Cardstock gets a wider minimum stroke width than vinyl, and the zigzags cleared it.
What you need
- Cutting machine and a standard grip mat (or a strong grip mat for heavy cardstock)
- Brown or tan adhesive vinyl and transfer tape for the knockout
- Brown and white cardstock for the layered man and the tags
- Craft glue or a glue pen
- Weeding hook and scraper
- Thin ribbon or baker’s twine for the tags
Vinyl knockout on a sign
- Upload the knockout file. Upload the SVG (our upload guide has the steps) and check it reads 5.12 in tall.
- Cut. Click Make It, leave Mirror off, choose your vinyl and cut with the colored side up.
- Weed. Peel the background, then pick out the eyes, smile, buttons and four zigzags. Take your time on the zigzags; each one is a single window.
- Transfer. Cover the whole cookie with transfer tape, burnish, and lift.
- Apply. Burnish him onto a clean sign, tile or glass block and peel the tape back at a sharp angle.
For weeding the zigzags, our weeding guide has a few tricks, and the transfer tape guide covers the rest.
Layered cardstock version
This one looks the most like a real iced cookie. The brown cookie is a single solid piece; the white icing layer is the ten detail pieces. Nothing to weed out of the middle of either one.
Cut each color on its own mat with your cardstock setting. Cricut’s cardstock instructions suggest a standard grip mat for medium cardstock and a strong grip mat for heavy cardstock, and to flip the mat over and peel the mat away from the paper so it doesn’t curl. They also say not to use transfer tape on cardstock, so place the icing by hand. A dot of glue on each piece and tweezers make this easy; start with the buttons and eyes, since they’re the easiest to line up. See our layered paper crafts guide for glue options and our guide to cutting cardstock if the edges come out ragged.
The gift tag sheet
Six tags fit on one sheet (9.75 x 7.5 in), each 3.5 in tall with a round ribbon hole at the top of the head. Each tag is the knockout cookie, so the icing lines are cut through the card.
For white icing on a brown tag, back each tag with a solid cookie: take the Cookie layer from the layered file, resize it to 3.5 in tall so it matches the tag outline, and cut six in white cardstock. Glue the tag on top so the icing windows show white, then punch the ribbon hole through the backing with a small hole punch.
Write names on the back of each tag. Our Christmas gift tags file has plain cut-and-write tags if you need more room for writing.
Sizes
| Project | File | Height |
|---|---|---|
| Gift tags, cards, treat bags | Tags | 3.5 in each |
| Glass block, canister, cookie jar | Knockout | 5 to 6 in |
| Framed or layered paper decor | Layered | 5 to 8 in |
| 12 x 12 wood sign or window | Knockout | 7 to 10 in |
Keep the knockout and layered man at 5 in or larger. The zigzags are the thinnest lines in the design, and they’re the first to get too fine to cut cleanly if you shrink him. The tags are already at their checked size, so don’t make them smaller than 3.5 in.
A few ideas
Line up three or four knockout men across a long board with a hot cocoa bar sign or on a cookies for Santa plate. For a kitchen canister, try tan vinyl on a white canister so the icing reads white. Kraft cardstock makes a nice cookie color for the tags too.
Questions
Can I use the gingerbread man SVG on a shirt?
These files were checked for adhesive vinyl and cardstock, not iron-on. The zigzag icing lines are thin, so if you try iron-on, enlarge him to 7 in or more and press with your material maker’s settings or Cricut’s Heat Guide.
Do the hands and feet come off separately?
No. The zigzag icing at each wrist and ankle stops short of the edges, so the whole cookie cuts as one piece in the knockout file and on every tag.
How big are the gingerbread gift tags?
Each tag is 3.5 in tall with a ribbon hole in the head, and six fit on one 9.75 x 7.5 in sheet.



